Yes. Rubbit Car Wash In A Can™ has a neutral pH of 7, making it safe for all types of automotive paints and finishes, including ceramic coatings, PPF, matte paint, vinyl wraps, and more.

Each Rubbit Car Wash In A Can™ provides exceptionally high amount of touch-ups for any type of dirt and up to 3 full exterior washes, depending on your vehicle’s size and how dirty it is.

Not at all. This is the result of extensive research and innovation.
Our unique formula, combined with the precise microfiber fiber density, proper towel maintenance between washes, and the correct wiping method shown in our instructional video, ensures dirt is safely lifted away—leaving your paint flawless and scratch-free.

To use Rubbit Car Wash In A Can™, spray a thin layer onto the surface and divide the car into sections to prevent the foam from drying before wiping. Always start from the top of the vehicle and work your way down. Spray the foam on the first section and wait 5–10 seconds to allow it to lift and encapsulate dirt, then fold a microfiber towel into quarters and wipe using straight-line motions. Finish each section with a clean, dry microfiber towel, and continue the same process on the remaining sections.

Rubbit Car Wash In A Can™ is the perfect solution for effortlessly removing dust, road salt, grime, bird droppings, bug splatter, and tree sap. Simply spray Rubbit Car Wash In A Can™, let it sit for 10–20 seconds, then wipe to reveal a showroom shine in minutes. For mud, Rubbit Car Wash In A Can™ works perfectly on light mud, while heavier, thick, or fully dried mud may require a pre-rinse first. Rubbit Car Wash In A Can™ can also be applied safely to a lightly wet surface.

After washing your car, the microfiber towels will already be soaked with the Car Wash In A Can's foam, which acts as a detergent. Machine wash the towels at 70–100°F (21–38°C) on a short to medium cycle without adding any laundry detergent or fabric softener. The towels can also be washed by hand in a bucket or tub. Make sure they are completely dry before your next car wash, either by air drying or using a dryer.

Absolutely! Rubbit Car Wash In A Can™ is safe and effective on many surfaces, including windows, home appliances, grills, bicycles, motorcycles, boats, and more—making it a versatile cleaning solution beyond just cars.

When you wash your car with Rubbit, you only use 10 ounces of water per wash. In comparison, a regular home wash typically uses about 40 gallons of water, while a basic car wash tunnel can consume over 120 gallons per wash. By using Rubbit, you can save over 3,000 gallons of clean drinking water annually alone. With its neutral pH level, it guarantees effective and safe use, not only for your car, but also for your skin, respiration, and the environment.