Yes. Use the included Rubbit Alcohol Prep Cleaner to remove contaminants, waxes, and old coatings. This ensures the nano coating bonds properly to the glass and lasts longer.

Wipe A lays down the initial nano coating layer across the entire windshield. Wipe B activates and strengthens that layer, ensuring full coverage and durability. Both steps are required for best performance.

No. A light haze is completely normal during the 2-minute setting time after using Wipe B. Simply buff the windshield gently with the clean microfiber towel to remove any haze or marks. If stubborn streaks remain, reapply Wipe B to that spot and dry immediately.

You can drive immediately after buffing, but for best results, avoid heavy rain, car washes, or using the wipers for at least 1 hour to allow the coating to fully bond to the glass.

If streaks or hard wipe marks appear, simply re-moisten the affected area with Wipe B and then dry it immediately with the microfiber towel. This will smooth out the coating and restore clarity.

On windshields, the coating typically lasts for one winter season, since wiper use gradually reduces its effectiveness. On side windows, rear glass, mirrors, and other areas without wipers, the coating can last up to one year.

Yes—but only on exterior surfaces. The coating is designed specifically for the outside of your windshield, windows, and mirrors. Do not apply it on interior glass, as it may cause haze, visibility issues, or improper bonding.